The popular manufactured stone materials are nearly all created products haven country of the adhesive. The best and the best, looking stones, are in high of degrees highly developed poured concrete products, which are formed with special forms and high-quality long-lived durable pigments. Lower quality-manufactured stone is still simple even a mixture of the sand, the small stones, the adhesive and the pigments. Which concerns defective product, I would assume this only if the actual stones themselves were soft and easily zerbroeckelt.

The stone bricklayer works with wet mortar and gebuttert the piece of the stone well, before he operated it in the place. If we had video tape recording overall length of the workers, whom stone of your Nachbars and somewhat last meteorological data, I that we would discover fast, assume what wrongly went. My instincts explain to me that the disturbance was 99 per cent of the referred technical skill, not product loss.

Manufactured stone is stuck on the vertical surface of a house in the comparison with natural stone, which is adjusted to another. Traditional stone is stacked and the force of gravity presses on each stone down. Manufactured stone is usually adhered a wall surface with an adhesive stucco mixture, which is frequently in the haven country adhesive very rich.

The process of the attachment of the manufactured stone is not too different to the way, which traditional adhesive stucco is applied to the lateral walls of a house. With traditional stucco some layers of the wet stucco are used and troweled to the desired end. The wet stucco is a mixture of the sand, haven country the adhesive and sometimes different components such as lime or Latexmodifizierfaktoren. As soon as drying is, the stucco as hard as rock. With manufactured stone the hardening process happens on the factory in place of of jobsite. The bricklayer uses simply a stucco mixture, in order to stick the manufactured stones for the house.

In the case of your Nachbars each possible number of things could have wrongly gone. The stucco mixture, which used the outside firm, can have been wrongly mixed. It could have had too little haven country adhesive in it. The stucco mixture could have sat around the jobsite, which after it is too long, had been mixed. It could have begun to harden on the mortar boards. If the outside firm tried then to breathe the life in this used up stucco mixture by having formed it with water retempering, this a very weak tying stucco.

The wall surface, to which the stones were adjusted, could have been dusty. The actual manufactured stones could have been dustily, too hot or to drying. It helps frequently, if the back surface of the stones is somewhat damp, if the stucco mixture is used. If the stones are too hot and dry, them box sucking too much water from the stucco mixture to fast. If this happens, the stucco mixture never obtains its Design strength.

I can explain to you for a fact that, if the manufactured stone per the instruction of the manufacturer is used he should remain on the side of your house for many years. If it to the right done, can I to see that a reason, why he could not for hundreds of years it does not last they cementing you stucco, which is mixed correctly and applied box for hundreds of years with Muehelosigkeit to last. Hold in the understanding, which the stucco mixture with manufactured stone hidden in most cases of the rough weather elements used. The manufactured stone takes the main interest of the wear of the weather. If your outside firm lasts the time to mix the stucco correctly and use it, while it is fresh, you should not have problems more whatsoever.

If you really stick the manufactured stone to a house wish, like epoxy, you, can add a small step the process. Usually the stone at a surface is used, which has already a layer of the rough adhesive stucco, or it can even be a concrete block wall.

As soon as all materials are set up and the stucco is mixed, mix a row the haven countries adhesive color. This is simply the haven country adhesive propellant, which is mixed with pure water, until it is the agreement of the thin sauce. Moisten the surface of the wall somewhat and the back of the stone. Use a brush, in order to use much thin section of the adhesive color at the wall surface, in which the stone is set and to the back of the stone. Coat immediately the back of the stone with the stucco mixture with butter and set you the stone on the wall. Regard the stone in the place as 10 seconds.

The adhesive color works, because it forms millions of the microscopic blocking crystals between the stone, the stucco and the wall surface. The stucco manufactures its own crystals, but the adhesive color adds straight even more tying energy. The adhesive color is simple to apply and durably the stones in position will lock.